描述
EnOcean模块
特征
- 接收和解码的EnOcean传感器信号
- 编码并传输EnOcean的执行器信号
- 支持固件自动更新
技术参数
通信协议
- 易能森
通信频率
- 868.3兆赫（欧盟）
- 902.875兆赫（美国）
通信范围
- 高达30米的室内或室外70米
外形尺寸
- 86毫米（长）x30毫米（宽）x48毫米（高）
环境温度范围：
- 工作：0°C至-40°C（华氏32度至华氏104度）
- 存储：-25°C至70°C（华氏13度至华氏158度）
- 湿度：5％至95％，非冷凝
附件
- 旋转式天线延长线（选购）
- 快速入门指南
符合法规（待定）
- EMC：FCC，CE
保修1年标准
下载
常问问题
EnOcean Module is used for paring of Zipabox with the devices that communicate on EnOcean Radio Frequency spectrum range.
EnOcean module must always be installed in expansion slot 2 of Zipabox. Before connecting it please power down your Zipabox by disconnecting it from the power supply and if you have a Backup module disconnect it as well. After this connect the modules to the Zipabox and then connect the Zipabox to the power supply again.
If you have other module already connected onto slot 2, you can connect EnOcean module on it. Other modules can be attached to EnOcean module. What is the maximum number of modules than can be installed on one slot of your Zipabox at the same time? Two modules can be installed on every slot of your Zipabox at the same time.
两个模块可同时安装在Zipabox上
(missing_translate_for: zh__21101)
评论
目前还末有评论