Please wait

Smart Smoke Sensor – Z-wave

 39,00 -

Zipato Smart Smoke Sensor (Z-Wave) is designed to give early warning of developing fires by sounding the built-in alarm horn, based on Z-Wave technology.  Z-Wave is a wireless communication protocol designed for remote control of appliances in residential automated homes and light commercial environments. It can not sense gas, heat, flame and cannot prevent or put out the fire.

Total: 0
SKU: hm-hs1sa-z.*. Categories: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , .

Smart smoke sensor Z-wave

FEATURES

  • The new Z-Wave 500 series chip supports multichannel operation and higher data rates
  • Sound and Z-Wave alerts on smoke detection
  • Built-in sound alarm
  • Low power consumption
  • Low battery auto report
  • Easy installation and relocation

TECHNICAL SPECIFICATIONS

OPERATING CONDITIONS:

  • OPERATING VOLTAGE 3V
  • ALARM CURRENT 60 mA
  • STANDBY CURRENT 20 uA
  • OPERATION TEMPERATURE -10°C ~ 50°C

ALARM SOUND

  • 85Db (1m distance)

PROTOCOL Z-Wave Plus POWER CR123A, 1400mAh RANGE  

  • up to 30 meters indoor
  • up to 70 meters outdoor (designed for indoor use only)

DIMENSIONS

  • DEVICE DIMENSIONS: 60 x 60 x 50 mm
  • DEVICE WEIGHT: 132g

FREQUENCY

  • hm-hs1sa-z.eu 868.42 MHz (EU)

REGULATION

  • EMC: FCC, CE

WARRANTY 1 year standard

FAQ

Is there a way in which I could test my smoke detector?

You can test the sensor by pushing firmly on the test button for around 2 seconds until the horn sounds, the sound pattern is 3 beeps, pause, and then 3 beeps with the red LED flashing continuously and rapidly, and the controller will receive a smoke alarm test notification. If the Smoke Sensor beeps three times with the yellow LED flashing three times in 43 seconds, it indicates the Smoke Sensor is not working properly, so it needs to be repaired. This is the only way to make sure that the Smoke Sensor device is working properly. If the device fails to test properly, have it repaired or replaced immediately. If you suspect your Smoke Sensor’s alarm does not work, test it by pressing the test button to ensure it works properly.

Where should I place my smoke alarms?

It is important that you have the proper placement for your smoke alarms. Install your alarms at least 20 feet from appliances like furnaces and ovens, which produce combustion particles. Alarms should be at least 10 feet from high humidity areas like showers and laundry rooms, and at least 3 feet from heat/AC vents.

What replacement batteries can I use?

The proper battery type is a CR123A 3.0V non-rechargeable battery. Never use rechargeable batteries because they may not always provide a consistent charge.

How do I check my battery status on my smoke detector?

Once you add your smoke detector to your controller, you can always check your battery status on the site:my.zipato.com. It will be displayed as a gradient of a filled white battery icon.

Additional Information

Weight 0.092 kg
Dimensions 6.8 x 6.0 x 6.8 cm
Frequency

AUSTRALIA – AU, EUROPEAN UNION – EU, INDIA – IN, ISRAEL – IS, RUSSIA – RU, UNITED STATES – US

Reviews

There are no reviews yet.

Be the first to review “Smart Smoke Sensor – Z-wave”

Zipato

Zipato

There are no products